Nav
d71083c3f9
Tidying
2024-10-06 18:10:02 +01:00
Nav
6c67424af9
On RISC-V activation, clear any triggers that were left over from a previous debug session
2024-10-06 18:06:58 +01:00
Nav
ecd0f5b054
First pass at RISC-V hardware breakpoints (Trigger module)
2024-10-06 17:54:08 +01:00
Nav
ecf0bd8919
Added try member functions for RISC-V abstract commands and register access
2024-09-04 00:15:46 +01:00
Nav
2a01f727bf
Tidying RISC-V register structs
2024-09-04 00:13:55 +01:00
Nav
914153077e
Corrected memory address/size alignment in EDBG and RISC-V drivers
2024-08-30 19:59:59 +01:00
Nav
6cdbfbe950
Massive refactor to accommodate RISC-V targets
...
- Refactored entire codebase (excluding the Insight component) to accommodate multiple target architectures (no longer specific to AVR)
- Deleted 'generate SVD' GDB monitor command - I will eventually move this functionality to the Bloom website
- Added unit size property to address spaces
- Many other changes which I couldn't be bothered to describe here
2024-07-23 21:14:22 +01:00
Nav
55d3fe76e0
Moved EDBG protocol code to more appropriate directory.
...
Updated necessary namespaces.
Other bits of tidying.
2023-11-17 22:20:39 +00:00
Nav
46bbf9cb31
Fixed seg fault bug when clearing HW breakpoints in EDBG driver
2023-09-22 20:52:17 +01:00
Nav
9698d83cb4
Clear HW breakpoints upon entering programming mode in EDBG driver
2023-09-22 20:51:59 +01:00
Nav
b3d03f73ac
Clear hardware breakpoints in clearAllBreakpoints() (EDBG AVR8 driver)
2023-09-21 01:10:35 +01:00
Nav
b5df37ae9b
Removed TargetProgramCounter type alias
2023-09-21 00:40:30 +01:00
Nav
d7b59cac59
Support for hardware breakpoints
2023-09-20 23:43:29 +01:00
Nav
9a6e22e6c7
Corrected member initialisation order (addressing -Wreorder warnings)
2023-08-19 21:53:00 +01:00
Nav
c622c9bd2e
Fixed missing includes which were resulting in failed builds with GCC 13+. Thanks to @jpf91 for reporting
2023-08-19 17:12:40 +01:00
Nav
5896306f1a
Removed redundant 'Bloom' namespace from entire codebase
2023-08-13 15:47:51 +01:00
Nav
216a1357b7
Moved programming mode requirement for fuse programming into EDBG driver, as it is specific to that driver
2023-07-18 23:17:13 +01:00
Nav
1f90f21870
Refactored the preserveEeprom implementation to make use of the EESAVE fuse
2023-07-18 23:17:13 +01:00
Nav
f3f0b504f3
Removed fuse type restriction when extracting fuse bit descriptors from AVR8 TDFs
2023-07-18 23:17:13 +01:00
Nav
ba03833325
Lots of tidying
...
- Removed generic `avr8` target
- Simplified AVR8 target construction
- Introduced register descriptor IDs
- Simplified GDB register mappings
- Simplified target interface contract
- Other bits of tidying
2023-07-18 23:16:06 +01:00
Nav
ab8693b1e0
Fixed bug where Bloom wasn't managing the DWEN fuse bit on some development boards.
2023-07-18 21:28:45 +01:00
Nav
efeb5ad48c
Corrected "Unknown target family" error for new AVR EA targets.
2023-05-12 19:08:52 +01:00
Nav
5825b11d0b
Added suggestion to check OCDEN fuse bit, in error message for DEVICE_NOT_UNDER_CONTROL error.
2023-05-08 13:24:45 +01:00
Nav
1f57ca3f21
Corrected bug with leaving programming mode on Snap and PICkit 4 debug tools
2023-05-08 02:44:03 +01:00
Nav
e5c78e7b3a
Added preserveEeprom target param
2023-05-07 16:50:59 +01:00
Nav
6ae1ef1be2
OCDEN fuse bit management
2023-05-07 16:49:45 +01:00
Nav
06b6c4460b
Tidying
2023-04-01 12:42:46 +01:00
Nav
755d24da5c
Tidying
2023-03-05 23:29:26 +00:00
Nav
f37f8f301a
Corrected bad rebase
2023-02-27 00:08:01 +00:00
Nav
8fa7e82c56
Moved Paths helper functions to service class
2023-02-20 21:55:55 +00:00
Nav
2b5756c5e2
Tidying
2023-02-20 21:54:28 +00:00
Nav
05832839f0
Output EDBG parameter values in debug logs
2023-01-21 13:54:40 +00:00
Nav
693abced8e
Replaced overloaded casting of CMSIS-DAP Command with rawCommand member function
2023-01-20 22:53:04 +00:00
Nav
e6f53b1afd
Tidying
2023-01-14 03:03:22 +00:00
Nav
5854b43816
Tidying
2022-12-18 19:28:57 +00:00
Nav
09fc5b73f2
Restricted the size of all memory access commands to ensure that no more than two packets are sent to and from EDBG debug tools
2022-12-18 19:25:40 +00:00
Nav
f64a14b04a
Corrected memory type used for memory writes with the JTAG config variant, in the EDBG AVR8 driver
2022-12-18 19:23:58 +00:00
Nav
5fe50b1997
Increase CMSIS response timeout for EDBG debug tools
2022-12-18 19:22:47 +00:00
Nav
ad06cdcc75
Removed the requirement of the max memory access limit being greater than the target's flash page size.
...
It's no longer needed as we've stopped enforcing the limit for memory types that require page alignment.
2022-12-17 18:31:05 +00:00
Nav
3b137aa539
Removed max memory access check during address alignment (it's not needed).
2022-12-17 18:10:51 +00:00
Nav
d9d8b3f450
Tidying
2022-12-13 21:12:16 +00:00
Nav
d0969ea0a7
Disable batching memory reads for EEPROM_PAGE memory type, in EDBG driver
2022-12-13 21:11:56 +00:00
Nav
bf8d59644a
Convert XMEGA addresses to relative form, in EDBG driver
2022-12-12 01:14:56 +00:00
Nav
91f8cbc931
Corrected value of APPICATION_BYTES XMEGA (PDI) device parameter in EDBG driver. Also added APP section start address extraction
2022-12-12 00:52:50 +00:00
Nav
151d10df72
Tidying
2022-12-12 00:05:01 +00:00
Nav
a792115781
Added sense-check in readMemory() in EDBG driver, to check if the EDBG debug tool actually returned data in response to memory read command
2022-12-11 23:38:23 +00:00
Nav
f0225dba88
Fixed bug (in EDBG driver) with writeMemory() forwarding an invalid memory type to readMemory() (EEPROM_ATOMIC can only be used for writing to memory, not reading)
2022-12-11 23:36:21 +00:00
Nav
131f1aa249
Added EEPROM_PAGE EDBG memory type and aligned both EEPROM_PAGE and EEPROM_ATOMIC memory types
2022-12-11 23:34:26 +00:00
Nav
a0421ce3ff
Refactored EdbgAvr8Interface::eraseProgramMemory() to ensure that it will restore EEPROM data if necessary
2022-12-11 23:32:49 +00:00
Nav
190d734ca3
Tidying
2022-12-11 17:41:20 +00:00
